Monthly Archives: March 2014

-Sampe Europe 2014: from aerospace OoA to automotive thermoplastics

TwitterLinkedIn

The title of the 35th International Technical Conference & Forum organized by SAMPE was “Low cost Composite Processing, from Aerospace OOA to Automotive Thermoplastic”. As the title indicates the main issues were the way to decrease the manufacturing cost in aerospace composites and the relation between thermoplastics and composites in automotive.

As it is known, it is very important to avoid the autoclave in order to reduce the composites manufacturing

  • reducing tooling cost for component development and low-rate production runs
  • adding capability for manufacturing of very large highly integrated composite components
  • reducing capital costs for autoclave and associated facilities
  • and removing autoclave bottleneck for production

Different methods for avoiding the autoclave were discussed along the conference, the experts presented different projects related to this subject, focused on the use of NCFs and resin infusion methods (summarized below).

Taking into account the unique challenge of increasing the presence of composites in new single aisle aircraft, current works are targeting at developing robust, fully automated processes for the realization of large scale structures. New functionalities are being added to existing materials, like e.g. enhancing conductivity for the improvement of lightning strike behavior.

On the other hand, thermoplastic materials are being optimized and, last but not least, new multi-functional composite materials are under development to broaden the range of composite applications. In addition, huge efforts are being undertaken to enable structural bonding for composite repair.

With respect to the automotive application, the use of carbon fiber reinforced thermoplastic was considered the next challenge. The laser assisted and induction processes in welding and heating with thermoplastics were the most important topics of discussion.

Related to the main subject of the DRY COMPOSITES blog, some projects have been outlined from the conference:

  • In terms of OoA manufacturing technologies by means of NCF and RTM, Airbus Military presented its BAHIA project, focused on alternative fan cowl doors configuration and manufacturing.  Within the project framework a new fan cowl door is designed and a RTM technology is used in order to manufacture the structure, by eliminating 2 autoclave curing cycles and joining grid and skin through a unique bonding line. This way, Airbus Military intends to obtain a more competitive and reliable product.

       Co-authors: Javier Gomez Vega, Maria Antonia River Orellana, Luis Rubio García

Airbus 340-642 fan colw door

Airbus 340-642 fan cowl door

  • Researches from Irish Centre for Composite Research, MSSI and University of Limerick presented a design of experiments study assisted in optimising the LRI manufacturing process (liquid resin infusion). According to them, LRI processes is challenging due to the difficulty in achieving full fibre wet-out, target fibre volume fraction and acceptable void content etc. In this study, flat composite panels were manufactured using aerospace grade Benzoxazine resins systems (one of which is targeted at high temperature applications) and aerospace grade carbon fibre NCF (non-crimp fabric with and without powder binder).

      Co-authors: Anthony Comer, Dipa Ray, Winifred Obange, Gearoid Lancy, Inga Rosca, Walter    Stanley

Double-omega stiffened skin manufactured by VIM using Benzoxazine B.

Double-omega stiffened skin manufactured by VIM using Benzoxazine B.

  • Other EADS, Eurocopter and University of Stuttgart researchers did also present a study, aimed at the fundamental material behavior of such unidirectional-braided structures, which are converted from carbon-fibers and thin thermoplastic auxiliary-yarns directly to the part geometry as UD-plies. The promising results emphasize the feasibility of using UD-braiding for structures with high stiffness as well improved damage resistance.

Co-authors: C. Metzner a, A. Gessler a, C. Weimer a, U. Beier b, P. Middendorf

UD-braiding – the machine, process and textile

UD-braiding – the machine, process and textile